Secoa Metal Finishing

7 Benefits of Powder Coating

7 Benefits of Powder Coating

Powder coating is a very popular way to paint parts, and there are numerous finishes and colors available. Mil spec powder coating provides a range of advantages over conventional painting methods, and it yields a durable, attractive finish. From its environmental impact to its cost, we’ll review the benefits of powder coating.

Efficiency

Because of the electromagnetic energy used to apply the powder to parts, there’s almost no waste in the powder coating process. Additionally, an expert can apply as much (or as little) powder as necessary in one application. Rather than allowing the parts to dry between coats, everything is done at once, which saves money and time.

Low Cost

Along with the money you’ll save by eliminating extra steps, powder coating is cost-efficient in a few other ways. The materials used are bought according to the job’s specifications. The powder is less costly than paint, and it takes up less space when stored.

Durability

As far as the finish is concerned, powder coating is more durable than most other options. When it cures, the powder will form chemical bonds in the process and creating a flexible, durable finish. Powder coated parts are highly resistant to corrosion, flaking, and scratching.

Variety

While mil spec powder coating has a few common finishes and colors, one of the biggest benefits of the method is the potential for customization. Powder manufacturers will create unique blends to match any color, texture, and finish. There are few competitive options in terms of versatility and range.

Environmental Safety

Because the powder is free of toxic chemicals and solvents, it’s regarded as safe for usage and disposal. The processes release no harmful chemicals into the air, and they produce less waste. However, expert painters know to avoid inhaling the powder and to wear safety gear that minimizes skin contact.

Quality

The powder coating application and drying processes create a finish not found in any other paint product. Because the powder melts and reforms as a solid, it creates a smooth surface without drips or runs. Therefore, there’s no need to sand or refinish if mistakes are made.

Maintenance

Powder coating is easy to maintain; no special solvents or cleaners are required. Because these coatings are so resistant to corrosion and damage, there’s no concern over rust and other cleaning-related damage. In most applications, an occasional wipe with soapy water is enough to keep parts clean and useful for years into the future.

It’s easy to see how mil spec powder coating is better than conventional paint in many areas. With the proper equipment, powder coating decreases finishing time, improves quality, and leaves users with a variety of finish options. Not only will you be able to use and dispose of materials in an eco-friendly, cost-efficient way, but your customers will also appreciate the tough, durable finish. Visit us online or call today for more details.

Social Solutions: Coatings for Municipal Water Pipes and More!

When cities and municipalities are installing new water or sewer pipes for municipal purposes, it is a good idea to protect the investment with durable coatings that protect against corrosion, mineral buildup and rust. We are proud to offer quality coatings for municipal pipes and waterworks accessories. These coatings protect and preserve the structural integrity of the pipes, connections, seals, fittings and pumps.

Secoa Metal Finishing offers a wide variety of coating options. Our company is the leader in fluidized bed dipping of water meters, valves and related components. Our low-cost iron coatings allow cities, towns and villages to reduce their expenses and preserve the quality of the water that they provide to their residents. We also make a holiday-free coating that can be applied to gray or ductile iron. With proper pipe maintenance this coating allows the pipes to remain free of corrosion for their entire expected lifespan. The coatings last for decades, even in places with hard water.

Our other options for coating of municipal pipes include rilsan nylon 11, which is a type of polyamide. We also offer coatings made from epoxy powders and high-build thermoplastics. If you are unsure of which coating would be the best one, Secoa engineers can help you decide. Our engineers and associates can review your water sample results, application requirements and other details in order to assist you in choosing the best coating option for your municipal pipes.

In addition to pipe coatings, we help municipalities with bridge coatings. Our Ultraseal product protects the metal components of bridges from rust and corrosion. Your bridges will last longer and have fewer needs for repair when you keep them sealed and maintained with our Ultraseal coating.

If your municipality has a lot of railings on walks or buildings, our powder coatings are a wise choice. These coatings protect the lifespan of the metal and reduce the risk of rust and corrosion. This is important for railings that get a lot of contact from people’s hands. Skin contains oils, sweat and other substances that could degrade the metal of a railing. With our coating on the metal, there will be less damage.

We can also provide you with high-visibility coatings. These are ideal for step edges and other places where safety is a concern. Our associates can also help you with the application of textured and non-slip surfaces in order to enhance safety.

Our coatings for infrastructure protect equipment and help it last longer. The coatings increase the durability and reduce chemical reactions that lead to buildup in the pipes or corrosion of the finish. For more information about our coatings for use on municipal water and sewer pipes, give us a call at 706-272-0133. You may also visit us online at https://secoatech.com/ for additional details about the coatings we apply and how our application process for these coatings.

FDA Compliant Powder Coating

In many industrial and manufacturing processes, some lubricants and chemicals cannot be used. This is the case for companies that manufacture food, medical devices or pharmaceutical products that will go on or in the human body. We offer an FDA compliant powder coating process that is designed to protect your machinery and act as a lubricant. We use only materials that are safe, resist corrosion and protect your equipment from common problems such as getting dusty or overheating.

Some lubricants attract dirt and dust. This may not be acceptable for your machinery or the products that you manufacture. We offer powder coating with epoxy, nylon and polyester. These high-grade coatings are made to last. Even if your production process involves corrosive materials, you can count on our quality coatings to stand up to constant exposure without degrading or damaging your equipment.

The process of applying one of these coatings for food or drug production machinery is swift and simple. We work around your schedule in order to make sure your supply chain keeps moving on time. If you want the coating put on a new piece of machinery, we can do it before the piece goes into your production line. Once we apply the coating, we test it in order to ensure that it is ready for your application.

You may be unsure of which type of powder coating is best suited to your needs. Our engineers can meet with you in order to discuss your process and what type of powder coating would be best suited to your application. We do not sacrifice on quality, but we are able to provide our powder coating services at competitive prices. Every coating that we perform includes a satisfaction guarantee.

Our associates can also provide you with documentation about our process and the materials that we use. You may need this for any FDA inspections of your facility. We look forward to helping you boost the efficiency and productivity of your business.

For more information, give us at Secoa Technology a call today. You may also visit us online at https://secoatech.com/ for additional details about our powder coating services.

FDA Food Safe Powder Coat – Characteristics and Benefits

The ideal product for non-stick, food safe applications are food grade powder coatings. These coatings are often used on stainless steel and other metal food processing and cooking surfaces. At Secoa Technology, we offer FDA approved fluoropolymer coatings that are designed to prevent corrosion and promote easy clean up, helping to ensure a long-lasting and durable surface. The FDA food safe powder coat products we provide are guaranteed to perform effectively in various food industry applications. The coating’s exceptional wear capabilities and lubricated nature enable the efficient operation of food processing equipment and minimize product contamination throughout repeated cleaning cycles.

Types of Food Grade Coatings

PTFE (polytetrafluoroethylene) – As one of the most popular nonstick products, PTFE offers exceptional release capabilities and chemical resistance, even at temperatures as high as 600°F. FEP (fluorinated ethylene propylene) – As a commonly used mold release coating, FEP provides exceptional abrasion and chemical resistance, crack stress resistance, and retention properties.

Food Grade Coating Benefits

Some of the benefits offered by food grade coatings include:
  • Non-stick properties
  • Able to withstand extreme cold and hot temperatures
  • Is not damaged by hot oils, water, steam, and fats
  • Quick mold release
  • Provides protection for food prep equipment
In addition, downtime resulting from the need to perform large-scale, time-consuming cleaning or equipment removal is minimized by the high release coating properties of FDA food safe powder coat. The food industry relies on these types of coatings to sustain consistent and uninterrupted food production. At Secoa Technology, we provide FDA approved coatings that food manufacturers need to simplify cleaning and maintenance, provide lubricity, handle high temperature applications, and supply the needed abrasion resistance and corrosion protection. Our process and work adhere to the highest standards in the industry. We provide quality checks along every stage of the coating process to ensure you obtain the most effective coating solutions. Our team is ready to work closely with you to determine the exact coating solution that will best meet the needs of your application. To find out how we can serve your safe powder coating needs, call us today at 706.272.0133 or use our contact form to send us a message.

Powder Coating from Secoa and the Benefits It Provides

Machinery and equipment used in industrial manufacturing environments work better and last longer when specialized coatings designed to prevent corrosion are applied to their surfaces. Not all powder coating is created equal, though. Superior powder coating from Secoa Technology can provide this protection and help businesses ensure their equipment operates with maximum efficiency and minimal downtime.

Powder Coating Protection

Various types of powder coatings can meet the corrosion protection requirements in various manufacturing and construction industry scenarios. These coatings can provide much-needed protection against external elements such as chemicals, oxidation, water, and UV radiation. As well, powder coatings can also prevent abrasion and the harmful effects that can produce for machinery, equipment, and associated parts. Beams, metal tanks, and other structural elements can also be protected through the use of architectural powder coatings.

Applications in Various Industries

A number of different industries can make effective use of superior powder coating products. The food processing industry is one. This industry utilizes coatings to prevent against contamination and to fulfill mandated sanitation requirements. Powder coatings are highly useful on moving parts were machinery and equipment in the aerospace industry, reducing friction between various components.

Powder Coating Professionals

A dependable and experienced industrial coating provider like Secoa Technology can help you choose and apply the right protective powder coatings for your industrial, manufacturing, or construction equipment and machinery. You may also benefit from maintenance and product application services from an experienced metal coatings provider. The products and services offered by such a company can help enable your machinery, equipment, components, parts to function properly, with optimum efficiency and long service life.

At Secoa Technology, we can provide you with superior powder coating services to help you meet the needs of your operational processes and projects. For more information about how we can serve you, call us today at 706.272.0133 or send this message through our contact form.

How Long Does Powder Coating Last?

Powder coating is able to keep its finish for as much as 15-20 years. The service life of the finish can depend on the type of pretreatment performed and the type of powder used. This type of coating provides resistance to corrosion, weather, and chemicals, giving it a finish that is more durable than paint or other liquid coatings. One question to examine is: How long does powder coating last? At Secoa Technology, we provide premier quality powder coating services to keep your equipment and machinery surfaces protected.

Pre-treatment with Powder Coating

Performing pretreatment of your substrate is a key step in obtaining the maximum service life from your powder coating. Given that powder coating particles are charged electrostatically onto a surface, it’s vital for the surface to be cleaned properly in order to obtain the right adherence. Typical pretreatment processes include removing existing corrosion and coating and then cleaning the exposed metal.

If the substrate is given a poor pretreatment, or none, the applied powder coating will tend to chip and have a somewhat brief service life. This partially answers the question of How long does powder coating last?

Types of Powder Coating and Their Service Life

The various types of powders available for various applications include:

Polyester – As a highly popular powder, polyesters provide an extensive range of gloss and color options. They can be used for exterior and interior applications. They offer superb durability that includes solid resistance to corrosion, chemicals, and UV weathering.

Epoxy – Superb durability and resistance to chemicals and corrosion. Preferable uses indoors because weather and UV exposure can produce deterioration and fading within months.

Fluoropolymers – Outstanding weathering capabilities enable for polymer powders. They are great for outdoor applications and provide solid resistance to corrosion.

Urethanes – Due to the similarity of the base polymer in each of the powders, many of the same characteristics exist in polyester as are in urethane powder. It can resist chemicals somewhat better and also has excellent matting capabilities. Urethane powders are also less flexible which makes them somewhat harder. The improved performance of urethane powders generally makes them pricier than polyester powders.

For more information in answer to the question of how long does powder coating last, or to take advantage of the specialty coating services we provide at Secoa Technology, call us today at (706) 272-0133.

How to Decide Between Anodizing, Painting, and Powder Coating

So you know that your metallic product is going to need a coating to protect it from the elements and/ or physical wear and tear. With so many coating options, how do you know what’s best? The following information can help you make a decision about whether to use anodizing, painting, or powder coating for your particular application involving aluminum. The desired appearance and application can determine the type of finish selected – this is true whether the application involves storefront, metal roofing, or curtainwall. At Secoa Technology, we can help you determine the right coating to use for your particular application.

Anodizing

The process of anodizing was developed more than three quarters of a century ago. It is a simple electrochemical process that creates a protective coating of aluminum oxide on an aluminum surface. How long the finish lasts is directly proportional to the thickness of the anodic coating applied. Aluminum oxide provides powerful protection to the base metal due to its characteristics of hardness, durability, and weather resistance.

Paints or Powders

Paints and powders falling under the category of organic coatings can perform well. However, there performance depends on the pigmentation, resin, and pre-treatment. If it concerns aluminum, pretreatment is of great significance. It is best that organic coatings on aluminum be applied in the factory. A weak component of an organic coating system is often the resins. PVDF, the type of resin however, has excellent weatherability. At the same time, epoxy coatings are designed only for indoor use.

Powder Coatings

Liquid coatings and powder coatings manufactured with the same pigment and resin will deliver the same performance characteristics in general. For any resin, which option to choose – liquid or powder coating – can simply be a question of the technique used in the application process.

Powder has the advantage of reduced air pollution in comparison to liquid coatings. Powders cured in an oven do not discharge VOCs.

Conclusion

The application will determine the aluminum finish and not only personal preference. Any place where a rich metallic appearance is desirable is often best suited for anodizing – for instance, in the case of storefronts. Handrails and storefronts can benefit significantly from polyester and anodized coatings. Curtainwall and metal roofing applications can benefit from the application of PVDF coatings. PVDF, anodized, and polyester coatings can all be applied to storefront, roofing, and curtainwall applications with suitable results.

As is obvious, you have many options available when choosing how to finish aluminum. For more information about your coating options in any application, contact us today at Secoa Technology.

Does Powder Coating Rust?

As it regards products that are used to finish surfaces, there is no such thing as a product that will provide a finish that lasts forever, so to speak. However, there are finishing products that can do the job for a very long time – and this is what you get when you use a high quality powder coating. At Secoa Technology, we provide our customers with superb quality coatings that are useful in a variety of industrial applications.

Powder coating offers excellent resistance to abrasion, peeling, chipping, cracking, rust and other types of damage stemming from chemical exposure. Although powder coating is not immune to deterioration, it is a highly durable coating, applies in the uniform fashion, keeps its loss in color, offers superb UV stability and is more environmentally friendly than liquid paint options.

Why the Durability of Powder Coating?

Powder coating provides better coverage than other applications, including liquid paint. The coating is applied, baked, and cured in a short number of minutes and produces a protective layer that is resistant against the most severe external elements. However, if damage occurs to the power coated layer, moisture can penetrate and open the door for rust to develop.

Unaddressed Damage Can Facilitate Rust

The automotive industry uses powder coating extensively in order to prevent the occurrence of rust on automobile surfaces. Damage that occurs to vehicles through the impact of stones, rock chips, and gravel while traveling at high speeds can break down the protective powder coating and must be addressed promptly in order to prevent moisture from moving under the finish, allowing rust to form. Rust can spread quickly if it is not addressed. Scratches, chips, cracks should be taken care of quickly in order to prevent the spread of rust.

In order to help ensure that a powder coating finish has an as long service life as possible, it must be properly applied and also maintained adequately during and after its installation.

If you need a strong and effective powder coating for any of your automotive, industrial, or manufacturing applications, our team at Secoa Technology can help you find the solution you need.

Powder Coating Services: Using Plascoat

Corrosion occurs throughout many different environments. Often times, architectural, industrial, and commercial structures are affected. Equipment supports and other machinery and devices fall prey to corrosive elements unless steps are taken to protect them. At Secoa Technology, we ensure the longevity and durability of your components through our various powder coating services.

Turning to Plascoat

While polyester, nylon, and epoxy powder coatings are common protective coverings for the substrate metals, a lesser known substance is making strides in Europe, Australia, and North America. This is Plastcoat, a thermoplastic powder coating. Once restricted to being used on dishwasher racks and other commonplace stainless steel equipment, it has since been making inroads into other markets. These include municipal, architectural, and food industries.

The product offers low maintenance costs while minimizing any production of hazardous gas fumes. Overall, Plascoat plastic powder coating possess the following features or properties:

  • Robustness
  • Durability
  • High performance
  • Low toxicity this includes the emission of fumes or other gases
  • Versatility
  • UV resistant
  • Extremely long-living or lasting
  • Impervious to animal urine and graffiti
  • Has approval for both water and food contact
  • Extremely low water absorption

In addition, this coating provides outstanding anti-corrosion properties. In fact, our engineers say it is the best in terms of resisting abrasive and harsh environments. It can easily withstand wear-and-tear as well as exposure to a hostile environment without any effect on its ability to perform. Plascoat also does not require primer or curing, making it a great option for our powder coating services.

Powder Coating Services and Plascoat

We offer our clients a wide variety of means through which they can protect their valuable components from degradation and destruction. The selection will depend upon the substrate metal, client preference and the intended purpose of the part. Among our many powder coating services, we proudly offer the versatile, durable and cost-effective Plascoat.

Why Polyester Powder Coatings Is Better Than Conventional Paints

When it comes to painting projects, polyester powder coating is a superior method when compared to standard painting techniques as it has many desirable properties. At Secoa Technology, we recommend the use of powder coating over paint. Below are some of the reasons why powder coating performs better.

Eliminate Overspray

Powder coatings are more economical. This is because the process of application does not allow over-spraying to occur. The coat is also more evenly spread out than what is achievable with ordinary paint.

During the application of the powder coating, an electrostatic gun charges the powder with positive ions while the surface is grounded. The powder is spread on the surface, if there are more positively charged ions on one part of the surface they’ll be repelled by the other positive ions and will move to a negatively charged part of the surface with no positively charged particles.

Applications

In general, Polyester powder coatings are easier to apply. Normal paint can never be applied as thick as powder coatings. The extra thickness makes objects coated with it much easier to bend without breaking the coating. Additionally, conventional paint can hardly ever be applied evenly on the surface of materials. Some applications that utilize polyester coating include surgical and dental materials and food processing and baking equipment.

Safety

When applied, ordinary paint can release vapor which can be harmful if it’s inhaled by the person applying the paint or people who happen to be in the vicinity. Polyester powder coating is inert and is applied on the surface by curing. This eliminates the risk of exposure to volatile volcanic compounds which can lead to respiratory complications.

Additional Benefits

When it comes to coating services, Secoa Technology is an industry leader with extensive experience. We provide polyester powder coatings, among other types of suitable coatings, and can customize our solutions to ensure they are the right fit for your application. You can rely on these coatings to add various benefits to your products and equipment, including lubrication, abrasion resistance, and durability.

By visiting our website you can discover more about our polyester coating services. Also, please feel free to contact us to discuss your project and protective coating requirements.