Release Coatings
At Secoa Metal Finishing, we specialize in the provision of superior release coating solutions that are tailored to meet the unique needs of our clients. Our expertise in custom release coating techniques is underpinned by a deep understanding of fluoropolymer coating technologies. This specialized knowledge enables us to deliver coatings that enhance the performance and longevity of your products and adhere to the highest standards of quality and efficiency. You can trust our authoritative experience to provide you with reliable, detail-oriented services and products designed to achieve outstanding customer satisfaction. Our advanced release coating solutions meet or exceed industry standards for a wide range of commercial applications.
Release Coating Services From Secoa Metal Finishing
Performance-Engineered Release Coatings for a Wide Range of Industrial Applications
Secoa Metal Finishing’s fluoropolymer coatings, also known as release coatings, are engineered to reduce friction and protect surfaces. These state-of-the-art chemical coatings are perfect for a wide range of industrial applications.
We offer custom release coating services tailored to meet your specific project requirements. If you need help determining which coating type will be best for your product, give us a call and we will be happy to advise you.
Precision Engineered to Eliminate Friction & Corrosion
Secoa’s fluoropolymer coatings can save you time and money while keeping your machines clean by helping your equipment run smoothly without the addition of dirt-attracting lubricants. Our optimized release coatings also prevent component seizure or failure due to corrosion, keeping machines operating consistently, even after long periods of dormancy.
In addition to reducing the coefficient of friction for smoother, more energy-efficient operation, release coatings from Secoa Metal Finishing can reduce (or even eliminate) excess noise and vibration produced by your equipment.
At Secoa Metal Finishing, we formulate our release coating systems using the highest quality products so that we can ensure exceptional results for every project. To learn more about how our fluoropolymer coatings can help reduce friction and corrosion, get in touch with one of our team members today.
Fluoropolymer Coating Options from Secoa Metal Finishing
Our release coating services are tailored to meet the exacting standards of our clients. Peruse our fluoropolymer coating options below to determine which is best for your application..
FluoroClad 3
FluoroClad 3 is a three-coat water based wet dispersion PTFE coating system that is internally reinforced with titanium. This coating exhibits excellent nonstick properties combined with outstanding durability. FC 3 is an excellent choice for tire molds and other similar industrial applications. This coating system complies with the FDA code of federal regulations referenced in CFR title 121 subsection 175.300.
FluoroClad 5
FluoroClad 5 is a water-based dispersion (wet spray) four-coat system that employs a titanium reinforced matrix designed for use as a mold release. It is especially effective in applications where non-stick properties and high cleanability are desired. This coating is designed for both industrial and food contact applications. FC 5 is especially noted for its excellent durability and high heat tolerance. It offers maximum continuous temperature resistance of 500° F (260° C). This coating system complies with the FDA code of federal regulations referenced in CFR title 121 subsection 175.300. It is also compliant with California prop 65.
FluoroClad 6
FluoroClad 6 is a two-coat system designed for a wide range of industrial applications where high levels of release and very good abrasion resistance are required. This coating has excellent abrasion resistance due to its low coefficient of friction. FC 6 has a continuous operating temperature rating of 450° F (232° C). This coating system complies with the FDA code of federal regulations referenced in CFR title 121 subsection 175.300.
FluoroClad 7
FluoroClad 7 is a three-coat water based dispersion (wet spray) coating system. FC 7 exhibits enhanced nonstick properties combined with outstanding durability. It has been specially formulated for application to surfaces of cookware, bakeware, and cutlery. It has a maximum continuous temperature resistance of 500° F (260° C). This coating system complies with the FDA code of federal regulations referenced in CFR title 121 subsection 175.300.
FluoroClad 19
FluoroClad 19 is a highly durable two-coat system that exhibits excellent release properties. FC 19 is available as both a wet dispersion coating and a powder coating. It is typically applied as a combination wet and powder coating, with the first coat a water-based primer and the second a PFA powder. However, there is a powder primer specially developed to accompany the top coat. All forms of FluoroClad 19 are compliant with the FDA code of federal regulations referenced in CFR title 121 subsection 175.300.
FluoroClad 22
FluoroClad 22 is a 2-coat powder-on-powder PTFE coating specially designed for griddles, grill grates, and other cooking applications. This coating system complies with the FDA code of federal regulations referenced in CFR title 121 subsection 175.300.
FluoroClad DL
In many cases industrial needs call for a compromise between release properties, corrosion protection, and durability. Not with FluoroClad DL. FluoroClad DL is a unique blend of powder-on-powder chemistries that results in a superbly durable and flexible nonstick coating with applications in a vast array of industrial settings. With the FluoroClad DL products the customer can expect to an increased durability, higher temperature resistance (550° F, with peaks up to 600° F), and increased chemical resistance (over 1,000 hours salt spray (ASTM B-117)) than with traditional fluoropolymers. FluoroClad DL is available in two forms, metallic (FC DL-M) and non-metallic (FC DL-C). This coating system complies with the FDA code of federal regulations referenced in CFR title 121 subsection 175.300.
FluoroClad SDFC
Fluoroclad SDFC is our ceramic reinforced, two coat water based system that was specifically devised to repel slag buildup and weld splatter.
Secoa Metal Finishing Goes Above and Beyond to Serve Your Unique Metal Coating Needs
Established in 1964, Secoa Metal Finishing has been providing metal coating services for nearly six decades. Thanks to our vast amount of industry experience, you can trust us to provide you with the right metal finishing solutions for your unique application. To learn more about our release coating services, contact us today. Give us a call at (706) 272-0133 or request a quote.